What is the Finishing Cartridge?
The Finishing Cartridge is a metal cartridge that will help you utilise all remaining Candy, each time you use the pen.
Every Polaroid CandyPlay 3D Pen comes with a Finishing Cartridge.
Using the Finishing Cartridge
The Finishing Cartridge should be used when you have finished creating your design, before cleaning,
or when you wish to change the Candy flavour, in order to push through any remaining Candy.
Insert the Finishing Cartridge into the pen as you would insert a Candy Cartridge. Press the Start button to push the remaining Candy through the heated nozzle.
Once all the Candy has been extruded, the piston will automatically retract.
Watch Video
The Finishing Cartridge will be held in the nozzle by the residual Candy.
To remove the Finishing Cartridge, please wait until the pen has completely cooled and then remove the nozzle (watch the “How to clean the pen” tutorial video for more details).
Carefully place the nozzle and Finishing Cartridge into boiling water, with the nozzle pointing upwards, and leave for between 2 and 5 minutes, allowing the candy to dissolve. Then use a heat resistant utensil to remove the nozzle from the boiling water.
The Finishing Cartridge should now be easily removed from the nozzle. If not, repeat.
Cleaning
The Polaroid CandyPlay 3D Pen MUST be cleaned thoroughly before the first use and again
after every use.
Learn how to use the Finishing Cartridge to help clean your pen with this simple step-by-step tutorial.
Find out more